 |
||
|
Home Page | Buildings Page | Insulation Page | Contact Us Steel Frames | Builder Friendly | Dimensions | Options Galleries: Page-1, Page-2, Page-3, Page-4, Page-5, Page-6, Page-7, Page-8 |
||
| Manufactured with
the do-it-yourself person in mind. Our included Manual and
Foundation Guide will guide you or your local contractor step by step
from ground preparation to adding finishing touches to your new steel
truss
building. |
||
| Tool
kit can be found in almost every modern American garage. |
Clips
for the 2x6 purlins and 2x4 girts are pre-welded at the factory to
greatly cut down on your valuable erection time.
|
|
| Tool Kit Required 100’ Tape Measure 12’ Tape Measure Ball Peen Hammer Claw Hammer 8” Screw Driver 1 ½ Spud Wrench Drive Ratchet 15/16” Drive Socket 7/16” Magnetize Drive Socket 15/16” Box Wrench 9/16 Socket Tool Belt and Bags Tri Square Shovel 3/8” Drill 2-50’ Electric Cords 10” Tin Snips-Right Hand 10” Tin Snips-Left Hand 20” Extension Ladder 4’ Level Plumb Bob Chalk Box Warehouse Broom 7 ¼ Heavy Duty Skill Saw Metal Blade Eye Goggles ½ “ Open Wrench 10” Vice Grip |
 |
 |
 |
 |
|
 |
 |
|
| 3510 Messanie Street, St. Joseph, MO 64507 Local Phone: (816) 901-9999 | Toll Free: (877) 704-7283 | E-mail: info@dmacbuildings.com |
||